How to install Green-White Pin Extractor 1.0 for Recharge Card

How to install
To install the Green-White tech Pin Extractor 1.0, follow the steps below.
1. Double click on the software folder to open it.
2. Click on the .exe file to begin installation.
3. Click on finish to complete installation.
How to activate
1. Run the software by double clicking on its shortcut icon.
2. Call the phone number displayed on the software interface.
3. Click on show pin if you can’t see your pin.
4. Follow the instructions of the person that answered your call. The below figure shows the inactivated interface.
Every copy of the Green-White Pin Extractor 1.0 has a pin in it, you must send the pin to the above number to get your activation key. Enter the activation key in the space provided and click on activate. When a correct activation key is entered, it will show a congratulating message as shown below.
Just click on ok and that’s it. The main interface will appear as shown below.
How to use
As can be seen above, the software contains File, Print, Reset and Help. When any of them is clicked on, a detail navigation list will show up. The picture below shows the content of each of the main list above.
You may wish to configure the software by inputting your company’s data such as company’s name, address and contact number. To do this, click on file to reveal its content.
Click on “Company And Location” to enter your data in a form as shown below.
When you are done , click on Ok. The next step is the actual task (pin extraction); to do this, go back to file but this time click on Network and select the Network you wish to extract. Let’s say you want to extract Airtel Pins for example, click on it and the following form will appear.
Enter your reference number in the space provided and click on import. Figure shows the import form.

Click on the network and then click on open. The form will now contain the name of the selected file. All you need to do from here is to select the number of pins you want to print on a sheet by clicking on Pins Per Page.
When you select pin per page, click on Extract Pin; if extraction is successful, it will display the number of extracted.
If you are ready to print, click on yes else, click on no to print on a later date. Clicking on yes will proceed to page setup form.
Leave it on Portrait and set Paper Size to A4 as shown below.

Click on ok to print.